Title - How to Make Any Laptop Touch Screen | Magic!! 🤔
Touch When you Need it
Imagine taking a non-touch PC and within seconds making it a touch interactive device.
You simply connect AirBar and then start to interact with the display immediately – it´s Plug-and-Touch.
Compared with today’s PCs with built in touch, the AirBar sensor keeps your high quality matte display glare free and without greasy finger prints.
Choose the PC you want and let AirBar provide the touch when you need it.
Compatibility
This AirBar works with most 15.6" PC laptops running Windows 10.
System Requirements
- 15.6" PC Laptop
- Windows 10 operating system
- Plug and Touch: Simply attach the AirBar with the included magnets to the bottom of your screen and plug in the USB cord
- Compatibility: AirBar works with most notebooks running Windows 10 with 15.6 inches screen size
- Touch Using Any Object: Touch with a finger, glove, paintbrush, stylus and more
- Designed for Windows 10 laptops
- Gestures: Tap, swipe, pinch, zoom and rotate
- Add touchscreen capabilities
Before you place your order; AirBar comes in different sizes. If you don’t know the size of your display. Just measure it diagonally and choose the size that best fits your computer.
- Now your AirBar sensor has arrived and it's time to attach it. Peel the small round pieces of paper off the two magnets on the back of – AirBar (this should reveal the magnets’ sticky surface).
- Position AirBar on the bezel below your laptop’s display, with the top of the device 3 mm below the bottom of the display (the small marks on either side of your AirBar are markers for the display to fit inside).
- Attach AirBar to the bottom bezel and press gently above the magnet points.
- Remove the AirBar, press the magnets and hold for 10 seconds. Make sure the two magnets are secured on your laptop under the display.
No comments:
Post a Comment